How to install Windows without a disk and without a flash drive

Guides

Installing a Windows operating system involves certain steps. How to boot Windows without a flash drive or CD-ROM will be discussed in this article.

Is it possible to boot Windows without a flash drive and CD-ROM?

Many people install Windows from a pre-prepared flash drive or disk. To do this, the user has to exit the BIOS and do a few manipulations.


The procedure to install Windows 7 via bootable flash drive or CD in BIOS
However, there is an alternative way to boot Windows. It is suitable for users of personal computers who find it difficult to navigate in the BIOS. This method does not use a USB stick.

How to reinstall Windows without a disk and without a flash drive

When considering Windows 7, this procedure is done in this sequence:

  1. Enter the Start menu and open the”Control Panel”.
  2. From the list of all options select”Restore”.
  3. Another window will be displayed, at the bottom of which you will have to click on the”Advanced recovery methods” button.
  4. In the menu that appears, click on the line Return the computer to the state preset by the manufacturer.
  5. Follow the installer instructions.

At the end of the reinstallation process the PC will look like it was originally sold in the store. The user only needs to download the necessary software from the Internet and put it on the PC.

Warning! Before reinstalling Windows by the method described above, it is important to copy the necessary information from the computer to a flash drive or other media. It is not possible to restore the information after reinstalling the system.

What applications and programs you need

How to install Windows 10 without a flash drive and disk

You can also use specialized software downloaded from the Internet to reinstall the system.


Daemon Tools Lite program interface for installing Windows on PC
You will need the programs EasyBCD and Daemon Tools Lite to complete the task at hand. The trial version of the software can be downloaded free of charge. To do this you need to go to the official site of the software developers.

For your information! Daemon Tools Lite is necessary for creating ISO image of your system and copying necessary files. With EasyBCD you can create a boot record.

The procedure of downloading and installing this software does not cause any special difficulties. The user needs to go to the official website of the applications and follow the instructions of the assistant. After downloading the programs, it is necessary to run them and set the Russian language of the interface. Then you can proceed to reinstalling Windows.

Preparing the partition for the installation files of Windows 7, 8

How to install from a flash drive Windows 10 – reinstalling the OS

Before you install the Windows operating system without a flash drive and CD-ROM, you must create an analogue of a bootable flash drive. Performance of the task is divided into several stages:

  1. Click the”My Computer” icon on the desktop.
  2. In the context menu, click on”Manage”.
  3. In the menu that appears the user can control the activity of the operating system. Here in the settings column on the left side of the window you should click on the line”Disk Management”.
  4. Click on the disk with the installed system.
  5. In the context menu click the line”Compress volume…”.


Disk Management section on the Windows 7 operating system
Important! After performing the above steps the ISO system image file will be created on the desktop of the PC.

Further actions are performed according to the following algorithm:

  1. Right-click on the image icon on the desktop and select”Properties”.
  2. On the”General” tab, read the information about the size. The user should know how much disk space this image occupies. Usually this size does not exceed 4GB.
  3. Go to the system disk compression window and in the”Compressed space size” field specify the image size, i.e. the number from the previous step.
  4. Click the”Compress” button. When the compression process is complete, the user will be brought back to the Disk Management window. Here next to the name of the system disk will be the size that is not allocated, i.e. compressed.
  5. Click the PCM on this size.
  6. In the context menu, click the line”Create simple volume”.
  7. After performing the previous step the”Create Simple Volume Wizard” window will start. Here you should press the”Next” button several times without changing the settings.
  8. To create the partition, finish the process by clicking on the”Finish” button.

Additional information! After creating a bootable system image you do not need to reboot the computer, otherwise you will have to do the whole procedure all over again.


Compressing the local C drive on OC Windows 7

Description of the procedure for booting Windows 7, 8 without flash drive and disk

In general, the process of performing the task is divided into the following steps:

    1. Downloading and further installation of the necessary software on the PC.
    2. Preparing partition for installation files, creating an image.
    3. Copying files.
    4. Creating a boot record.
    5. Installing Windows

!-7-!

How to install Windows 10 from a flash drive on an HP laptop

The first two points of installation have been discussed above. For a complete understanding, it won’t hurt to look at the execution of the remaining sections.

Copying files

To ensure that no important information is lost, you must perform this process according to the following scheme:

  1. Run the Daemon Tools Lite software that the user should have downloaded when reading the previous section.
  2. Click the”Quick Mount” button, select the previously created image and click the word”Open”.
  3. Open”My Computer. Instead of the drive will be the name of the drive with the installer and the drive D will be renamed”Install”.
  4. Right-click on the drive name with the right mouse button.
  5. Select”Open in new window” from the context menu.
  6. This will open an image window with the required files. You will have to copy them to”Install” disk.
  7. Send the computer to restart and check that all files are really on the”Install” drive.

Fig.5 Copying files before installing the Windows operating system

Notice! After copying files it is not recommended to close the program. It must be opened in the background, i.e. it must work automatically.

How to create a boot record

At this point the user must create an entry in the Download Manager. This circumstance will later allow you to select the desired installer when you turn on the operating system. There is a universal algorithm for Windows 7 and 8 to perform this task:

  1. Run the previously downloaded program
  2. In the main menu of the software in the left column of the parameters click on the line”Add entry”.
  3. Click on the WinPE button which is located in the”Removable/External Media” section.
  4. Click on the binoculars icon at the bottom of the window. This is the overview button.
  5. Open the”Install” disk on which the files from the system image were previously copied.
  6. Double click the folder”Sources” and start the file”boot.win”.
  7. Now you can restart your PC and proceed to install Windows.


EasyBCD interface

Download procedure

It consists of the following steps:

  1. While restarting the PC, press the F8 key three times. This will open the Windows Boot Manager menu. Here you have to select the installer”Install”.
  2. This will open the installer of Windows 7 operating system.
  3. Follow installer instructions.
  4. Set the language, select a full boot with additional parameters, and select the disk where the system will be located.
  5. Click on the”Next” button and wait for the software loading procedure to complete.

Important! The procedure of Windows 7 installation does not cause difficulties even for beginners. It takes a few minutes to boot the system based on the technical characteristics of your personal or portable computer.

How to install Windows XP without a disk or USB key !
Windows XP can be installed from your hard drive in the following way:

  1. Download the XP image archive from the internet. There is no need to uninstall the old system.
  2. In the downloaded folder run the file”Setup. EXE”.
  3. This will start a window in which the”Windows Setup” system is loaded.
  4. Click”Next” a couple of times to accept the terms of the license agreement.
  5. Reboot your computer at the installer’s request.
  6. When the restart is finished, a menu with further actions should appear on the monitor screen.
  7. Click on Enter to start the installation process.

Wait until it is finished and restart your PC again.


Windows XP installer window
More info! The above method of installing the Windows XP operating system will save the user’s files on their hardware.

Thus, OS Windows can be delivered in the shortest possible time, without having either a bootable flash drive or a CD. This method has both positive and negative sides. The information presented in this article allows to answer the question how to install Windows without a disk and without a flash drive on a stationary PC or laptop.

Pro Gamer
Rate article
Guides and Games news
Add a comment